Pitney Bowes RISO ComColor Printer - Manual (Page 34)

32
ComColor Series User’s Guide 03
4 Adjust the feeding pressure
adjustment lever.
Set it to “Standard” for normal use, and set it to
"Card" for thick paper, special paper, etc.
5 Check the tray settings on the
touch panel.
Set [Feed tray] for paper size and type. After
changing the type of paper to load, be sure to
change the [Feed tray] setting.
■ If you load many sheets at a time
1 Spread the guides and load
approximately 500 sheets in the
standard tray.
2 Adjust the paper guides so that
they will be suitable for the paper
size.
Move the guides against the edges of the paper,
lock the paper guides lever to fix the guides in
place.
3 Load the rest of sheets.
After loading all the sheets, perform the normal
setting. Follow steps 4 and 5 in "Loading Paper".
● Adding Paper in the High
Capacity Feeder
To add paper, use the standard tray descent button.
The downward position of the standard tray varies
depending on how the standard tray descent button
is pressed. The tray lowers automatically if you
remove all paper from the standard tray.
1 Press the standard tray descent
button to lower the standard tray.
Press and hold the standard tray descent
button.
While you are pressing the button, the standard
tray lowers. Press the button until the tray lowers
to the position where you wish to lower the tray.
Press, not hold, the standard tray descent
button.
The standard tray lowers to a certain position.
● The position to which the standard tray lowers
when paper runs out or when you press the
standard tray descent button varies depending
on the "Admin. Settings". See "High Capacity
Feeder Setting" in the "Administrator's Guide"
for details.
● When the standard tray is at the bottom, you
can load many sheets at a time, but to do so
you need to crouch down. If you want to load
paper standing up or if you rarely load many
sheets at a time, do not lower the standard tray
to the bottom.
● It is recommended to set the downward
position of the standard tray according to your
use. If you want to change the downward
position of the stacking tray, contact the
administrator.