Pitney Bowes RISO ComColor Printer - Manual (Page 11)

9
Part Names and Functions
ComColor Series User’s Guide 03
Face Down Offset Stapler (optional)
If the optional face down offset stapler is connected, you can staple printed sheets, or perform the offset
output by print unit.
a Stacking tray
Printouts are output face down.
The output tray slides. For normal output, align X
and W indicated by b to use the tray.
c Jam Release Cover
If paper jamming occurs during paper transfer from the
printer to the face down offset stapler, open this cover
and remove the jammed sheet.
d Staple Cartridge
Pull out the staple cartridge to replace a staple, or if a
staple is jammed.
e Staple Cover
Open this cover if a staple is jammed, or to replace the
staple cartridge.
f Face Down Offset Stapler Socket
Connect the face down offset stapler power cord.
Tray setting position Paper type and output
conditions
XW
Align X and W.
Normal (other than the
following)
X
W
Slide the tray and place
W to
b .
For thin paper smaller
than B5 without staple