Pitney Bowes RISO ComColor Printer - Manual (Page 12)

10
ComColor Series User’s Guide 03
High Capacity Feeder (optional)
If the optional high capacity feeder is connected, you can load approximately 4,000 sheets (plain paper,
recycled paper).
a Paper Feed Pressure Adjustment Lever
Use to set the paper feed pressure to either "Standard" or
"Card" to suit the paper type in the high capacity feeder.
b Standard Tray Descent Button
Use to move the high capacity feeder up or down when
replacing or adding paper.
c Paper Feed Guide Lever
Use to slide or fix the standard tray paper guide. Levers
are located on both sides of the standard tray paper
guide, in two positions.
d Front Cover
Open this cover when you turn the main power switch to
ON/OFF or when paper jamming occurs.
e Main Power Switch
Use to turn the main power ON and OFF when the high
capacity feeder is connected. Usually the power is left
ON.
f Standard Tray Paper Guide
Use to prevent paper in the high capacity feeder from
becoming misaligned.
g Envelope Guide
Use to print an envelope. Adjust the inclination angle to
suit the type of envelope you are using.
h Envelope Guide Angle Adjustment Lever
Use to adjust the inclination angle of the envelope guide.
Adjust the angle of the envelope guide to any of the four
levels.
i Envelope Guide Paper Feed Pressure
Adjustment Lever
Use to adjust the feed pressure to suit the quality of
envelope you are using.
j Standard Tray Padding Cover
Remove the cover when you load sheets smaller than A4
(LTR) or larger than A3 (LDR), or C5/DL-R envelopes.
k High Capacity Feeder Socket
Use to connect the high capacity feeder power cord. The
socket is located to the right of the back of the standard
tray.
If the high capacity feeder is connected, you
cannot use the standard tray.
l Machine Socket
Use to connect the machine power cord.