Pitney Bowes RISO ComColor Printer - Manual (Page 24)

22
ComColor Series User’s Guide 03
● Copy Mode
Setting Description See
[Basic]
Color mode Select color or monochrome printing. p. 2-9
Reproduction size Use this to reduce or enlarge the copied image. p. 2-10
Feed tray Change the feed tray, paper type, and feed control
settings according to the paper to be copied. p. 2-10
Original Select the original type to perform the appropriate
image processing and print the scanned data. p. 2-13
Scanning level Adjust the scanning density of originals. p. 2-14
Duplex/Simplex Specify the sides of the original to be read and the sides
of the paper to be printed on. p. 2-14
Direct Access entry
* 1
Up to 4 frequently used functions can be registered to
the direct access area. p. 2-17
[Selections]
Selections entry
* 1
Up to 16 frequently used functions can be registered to
the selections screen. p. 2-17
[Functions]
Save as default * 1 Register the current settings as the default values. p. 2-18
Check setting Confirm the current settings and print the settings
information. p. 2-18
Save/Call setting Up to 10 frequently used settings can be registered. p. 2-19
Select layout Set various finishing settings by selecting an output
image. p. 2-22
Copy and pause To check the printing result when copying a large
number of copies, the machine stops after printing one
set. p. 2-23
Additional copies * 1 Print one or more copies of previously copied original
data. p. 2-24
Save to folder * 1 Save scanned originals as data to the machine. You can
retrieve the data and print it when needed. p. 2-24
Save to archive Save scanned originals as data to an external controller.
You can retrieve the data and print it when needed. (When
using the optional ComColorExpress IS1000C/IS950C) p. 2-25
ADF scan & pause Copy all originals together, even when copying a large
quantity of originals that cannot be loaded at one time in
the ADF. p. 2-26
Scanning size Specify the scanning size of the original. p. 2-27
Mixed size original * 2 * 3 Specify this option when the original has multiple sizes. p. 2-28
Book shadow erase Remove shadows that appear in the center of copies
when an open book is copied. p. 2-28
Multi-up Specify Multi-up (Plural) (arranges continuous pages on
one sheet) and Multi-up (Single) (arranges multiple
copies of one page on one sheet) copying. p. 2-29
Stamp Page/Date Stamp the page number and date on the header or
footer. p. 2-31
Image quality Specify the resolution for scanning originals. p. 2-33
Gamma control Adjust the color balance (CMYK) of scanned data. p. 2-33
Image control Specify the image processing of the original. p. 2-34