Pitney Bowes RISO ComColor Printer - Manual (Page 33)

31
Print Preparations
ComColor Series User’s Guide 03
● In the High Capacity Feeder
1 Spread the guides.
Set the paper feed guide levers (in two positions
on both sides) to unlock the guides and slide the
guides.
The paper guide cannot slide when the standard
tray padding cover is attached, so remove the
cover in either of the following cases.
• Paper size: Smaller than A4 (LTR)/Larger
than A3 (LDR)
• Envelope size: C5/DL-R
2 Load the paper.
Load paper with the printing side face-up.
● If you load many sheets at a time, you cannot
adjust the paper guides. (Sheets are not in
neat order because they are bent or bumpy.)
Separate sheets into several loads. If you load
many sheets at a time, see "If you load many
sheets at a time" (p. 32).
● To load envelopes, leave their flaps open and
load them so that they will be fed from the
bottom. Use the envelope guide angle
adjustment lever to adjust the inclination angle
of the envelope guide. Adjust the feeding
pressure according to the quality of envelopes
you use. For adjustment, use the envelope
guide feeding pressure adjustment lever. Lift
the lever and slide it. Refer to the seals near
the lever, and perform a setting suitable to your
envelopes.
3 Adjust the paper guides so that
they will be suitable for the paper
size.
Move the guides against the edges of the paper,
lock the paper guides lever to fix the guides in
place.
Envelope Guide Paper Feed
Pressure Adjustment Lever
Thick
Envelopes
Thin Envelopes
Envelope Guide Angle
Adjustment Lever
Paper Other
Than Envelope
Thin Envelope or
Paper
Thick Paper and
Long Envelope
Level this
surface