Pitney Bowes DP50S Color Printer - Manual (Page 68)

5
5. Paper and Other Media
Special paper
66
Coated paper setup
Default: [Coated Paper 1]
If the print quality needs to be improved, select
[Maintenance] [General Settings]
[Coated Paper Setting] [Coated Paper 1]
to [Coated Paper 7].
When selecting the paper settings depend-
ing on the thickness, select [Coated Paper 1]
to [Coated Paper 5]. High numbered settings
allow thicker paper to be used, but are printed
more slowly.
When selecting the paper setting depending
on the type, select [Coated Paper 6], [Coated
Paper 7].
High numbered settings allow thicker paper to
be used, but are printed more slowly.
• Print speed is slightly slower than when
using plain paper
• Fan the paper before loading it. When using
the bypass tray, set the paper one page at
a time if multiple sheets are fed, paper jams
occur, or you hear a strange noise. Additional cautions
Special paper standard When you can not print successfully with other paper
type setting, set special paper.
Select [Paper Input] [Paper Type: (tray name)]
[Special Paper 1] to [Special Paper 3].
Select [Special 1] to [Special 3] in [Paper type].
Any input tray can be used.
Supported
Make sure paper is not stacked higher than the upper
limit mark ( ) inside the tray. When using the bypass
tray, make sure paper is not stacked higher than the
paper guides inside it.
Printer setup
Printer driver setup
Supported paper feeding tray
Paper capacity
Duplex printing