Pitney Bowes DP50S Color Printer - Manual (Page 102)

6
13. Pushing the front of the drum unit, fully insert it into the printer.
BMV073S
14. Lower the handle located on the front of the drum unit, and push it until it clicks into place.
BMV074S
15. Holding the drum unit firmly in place, pull out the tape.
BMV075S
• Remember to pull out the tape. Malfunctions occur if you attempt to print while the tape is
still attached.
• The removed tape is dirty. Be careful not to let it touch your hands or clothes.
16. When replacing a color drum unit, replace the three color units together using the same
procedure, before closing the inner cover.
6. Replacing Consumables
100