Pitney Bowes DP50S Color Printer User Manual
Page 64

5
5. Paper and Other Media
Thin paper
62
Duplex Printing
• [Thick Paper 1]: Supported
• [Thick Paper 2], [Thick Paper 3]: Not supported
• Print speed is slightly slower than when using plain paper.
• When loading paper in the printer paper trays or the paper
feed units, load at least 20 sheets. Also, adjust the side
guide so that it lightly touches the paper.
• Curled paper: If the paper is curled, flatten the paper before
loading it.
• If you are using thick paper with a smooth surface, paper
jams or multiple feeding can occur. Fan the paper before
loading it. If a paper jam or multiple feeding occurs even
after you have fanned the paper, set the paper one sheet at
a time.
Additional cautions
Paper Thickness
52 to 59 g/m² (14 to 16 lb.)
Select [Paper Input] [Paper Type: Bypass
Tray] [Thin Paper].
Select [Thin (52 - 60 g/m²0] in [Paper type].
Bypass tray
Not supported
When printing on thin paper, make a test print
and check the print quality. Depending on the
type of paper you are using, print quality may
degrade.
Make sure paper is not stacked higher than the
upper limit mark ( ) inside the tray. When using
the bypass tray, make sure paper is not stacked
higher then the paper guides inside it.
Paper setup
Paper driver setup
Supported paper feeding tray
Paper capacity
Duplex Printing
Additional Cautions