Pitney Bowes DP50S Color Printer - Manual (Page 21)

2
2. Installing Options
This chapter explains how to install various options for this printer.
Available Options
By installing options, you can improve printer performance and expand the available fea-
tures.
• Before installing options, the machine should be turned off and unplugged for at least an
hour. Components inside the machine become very hot, and can cause a burn if touched.
Order of Option Installation
19
When installing multiple options, the following order is recommended:
1. Attach the 1000-sheet paper feed unit or 2000-sheet paper feed unit
Either the 1000-sheet paper feed unit or 2000-sheet paper feed unit can be attached, but not
both.
2. Install the Gigabit Ethernet board
Install inside the controller board.
3. Install the interface board
Install in the slot of the controller board.
Only one interface board can be installed.
4. Insert SD card options
Insert in the SD card slot of the controller board.
There are two slots for the SD cards.
Each slot supports different types of SD cards.