Pitney Bowes DP50S Color Printer - Manual (Page 38)

2
2. Installing Options
11. Fasten the controller board to the printer using the five screws.
BMV271S
• Confirm that the board was correctly installed by printing the configuration page. If it is correctly
installed, “Gigabit Ethernet Board” will appear for “Device Connection” on the configuration page.
• If the board was not installed properly, repeat the procedure from the beginning. If it cannot be
installed correctly even after reattempting installation, contact your sales or service representative.
• For information on printing the configuration page, see “List/Test Print Menu”, Software Guide.
36
• Before using the board, you must configure settings from the control panel. For details, see “Ethernet
Configuration”.
• “Ethernet Cable Connection”
• “Ethernet Configuration”