Pitney Bowes DP50S Color Printer - Manual (Page 152)

9
9. Troubleshooting
Printing Problems
150
Toner smears appear on the print side of the page.
• The paper setting may not be correct. For example, although you are using thick paper, the
setting for thick paper may not be set. Check the paper setting of the control panel and printer
driver. See “Paper and Other Media” and the printer driver Help.
• When “Replace PCU:Black.” or “Replace PCU:Colour.” appears on the display, replace the black
drum unit/color drum units.
See “Replacing the Black Drum Unit/Color Drum Units”.
• Confirm that the paper is not curled or bent. Envelopes can be curled easily. Flatten paper
before loading.
See “Paper Recommendations”.
Paper jams occur frequently.
• Check the following:
• Paper guides are set correctly, leaving no gaps between paper guides and paper.
• The side guides of the paper tray are locked.
• Paper guides are not set too tight. If too tight, re-position the guides so that they gently touch
the loaded paper.
• The top of the paper stack is not higher than the limit mark inside the tray, or side guides of
the bypass tray.
See “Loading Paper”.
• If paper misfeeds every time duplex print is performed, check the following items.
• The end guides of the paper tray are set correctly.
• The loaded paper and the paper type set at the control panel match. For
more solutions to this problem, see “Duplex Print Always Misfeeds”.
• When printing on thick paper, it is recommended to load more than 20 sheets.
• If paper misfeeds occur regularly when printing from the bypass tray, the settings of the control
panel and those of the printer driver may not match.
• Paper not suitable for printing is used. For example, paper may be too thick, too thin, bent or
wrinkled, damp, or already been printed on. See “Paper Recommendations”.
• Pages may be sticking together. Fan the paper before loading it, or feed the pages one at a time.