Pitney Bowes DP50S Color Printer - Manual (Page 103)

6
BMV076S
18. Turn the two green levers clockwise to lock the cover.
BMV077S
19. Carefully close the front cover.
20. Plug in the power cable, and then turn on the printer.
17. Pressing both sides, firmly close the inner cover.
Replacing the Black Drum Unit/Color Drum Units
[Calibrating...] appears on the display, and the printer starts calibration. Wait until it stops. Cali-
bration takes four to five minutes. Do not turn off the power during calibration. Doing so results in
a malfunction.
101