Pitney Bowes DP50S Color Printer - Manual (Page 50)

4
BMW028S
48
4. Configuration
• If the printer is already placed on a TCP/IP-capable environment, you can also use
SmartDeviceMonitor for Admin or a Web browser to configure IP address-related set-
tings.
Specifying an IP Address (No DHCP)
Follow this procedure to assign a specific IP address to the printer. This is only necessary when
you will use the printer on a network without DHCP, or want to prevent the printer’s IP address from
changing. Before beginning, make sure that you know the IP address, subnet mask and gateway ad-
dress that the printer will use.
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [Host Interface], and then press the [OK] key.
3. Press the [ ] or [ ] to select [Network], and then press the [OK] key.
4. Press the [ ] or [ ] key to select [Effective Protocol], and then press the [OK] key.