beautypg.com

Changing fiber information of existing captures – EXFO FIP-400B Fiber Inspection Probe and ConnectorMax2 User Manual

Page 49

background image

Setting up Your Fiber Inspection Probe and ConnectorMax2

Fiber Inspection Probe

43

Changing Fiber Information of Existing Captures

Changing Fiber Information of Existing

Captures

It is possible to modify the information for an existing capture. This
information is provided by the automatic file naming. The procedure is
almost the same as the one for autonaming but the changes apply to the
current capture only.

To change fiber information:
1.
From the Main Menu, tap Identification.

2. From the Apply to list, ensure that Current capture is selected.

3. Set the parameters as needed. For more information, see Setting up

Autonaming on page 12.