EXFO FIP-400B Fiber Inspection Probe and ConnectorMax2 - Manual (Page 36)

Setting up Your Fiber Inspection Probe and ConnectorMax2
30 FIP-400B
Managing and Selecting Test Configurations
3. If necessary, in the Apply to list, select Next capture.
4. Choose the type of connector you want to use and tap the button at
the end of the row.
5. Select the configuration you want to edit and tap the button at the
end of the row.
Note: You cannot edit standard test configurations.
6. Change the criteria as required. For details, see the section on creating
a test configuration.