EXFO FIP-400B Fiber Inspection Probe and ConnectorMax2 - Manual (Page 31)

Setting up Your Fiber Inspection Probe and ConnectorMax2
Fiber Inspection Probe 25
Managing and Selecting Test Configurations
6. If you want to modify the general information, proceed as follows:
6a. In the Configuration Details window, tap the button at the
end of the Properties row.
6b. Modify the parameters as needed.

Configuration name: the application suggests a name for the
configuration. You can change it as needed (maximum 256
characters), but if you select a name that already exists, a suffix will
automatically be added so as not to overwrite files.

Connector type: Select which type of connector you are using for
your inspection.

Fiber type: Select whether you are inspecting singlemode or
multimode fibers.

Polishing type: Select the type of polishing for the fibers between
APC, PC or UPC.