EXFO FIP-400B Fiber Inspection Probe and ConnectorMax2 - Manual (Page 16)

Setting up Your Fiber Inspection Probe and ConnectorMax2
10 FIP-400B
Adjusting Brightness
Adjusting Brightness
Once the probe is connected to a fiber, you can adjust brightness in order
to better view the fiber under inspection.
The default brightness value is 50 %. This corresponds to the automatic
brightness mode. The brightness automatically returns to 50 %:

when you exit the application and the probe is still connected

when the application is open and you plug and unplug the probe

when the platform is in suspend or resume mode

when you lock or unlock a session (except on a MAX-700B)

when you log in or log out of a session (except on a MAX-700B)
To adjust brightness:
1. In Live video mode, tap the button to switch to video settings mode.
Brightness button