EXFO FIP-400B Fiber Inspection Probe and ConnectorMax2 - Manual (Page 21)

Setting up Your Fiber Inspection Probe and ConnectorMax2
Fiber Inspection Probe 15
Setting up Autonaming
3. Enter all the information as follows:
3a. Locate the row corresponding to the identifier that you want to
modify.
If an identifier is marked with an icon, a predefined list with
choices is available. If you select None, it disables the field from
the list (Next capture and Current and Next capture).
Note: When in Current capture, the identifiers set to None disappear from the list.
Note: The identifiers marked with an icon are fields that can be customized and
edited. The name of the identifier and its value can be modified.
3b. Tap the Value column corresponding to the desired identifier.
3c. Enter the information.
Note: You cannot edit the information in the dark gray boxes.