EXFO FIP-400B Fiber Inspection Probe and ConnectorMax2 - Manual (Page 26)

Setting up Your Fiber Inspection Probe and ConnectorMax2
20 FIP-400B
Managing and Selecting Test Configurations
Managing and Selecting Test Configurations
You can create and select specific test configurations according to the type
of fiber you are analyzing, the connector type or the type of anomaly you
are looking for.
Note: If you have the FIP-420B or FIP-430B probe, some test configurations as per
IEC 61300-3-35 and IPC 8497-1 standards, and other configurations with an
enlarged adhesive C zone are available by default.
Creating custom test configurations is done through duplicating an existing
configuration, and then modifying the desired criteria.
If you create configurations on one unit or computer, and want to transfer
them to another unit or computer, you can do so.