Echelon LNS DDE Server - Manual (Page 34)

Configuration Overview
When the LNS DDE Server starts up the first time, it will run using its initial
default configuration settings. The LNS Server determines some of these settings, so
the initial defaults may have been modified if you have previously used other LNS
applications. The LNS DDE Server will automatically detect and use LNS network
interfaces and LNS networks on the local PC.
The following sections describe the LNS DDE Server configuration settings. Settings
that are unique to the LNS DDE Server are stored entirely in the system registry of
the local PC that the LNS DDE Server is operating on. Settings that affect the LNS
Server are stored in the LNS Server database.
Server Settings
To configure the LNS DDE Server, select the Server command in the Configure
menu. You can also right-click the LNS DDE Server item at the top of the folder
pane and select Configure from the shortcut menu. The Server Settings tab of the
Server Configuration dialog appears:
The settings in this dialog are described in the following sections.
3-2 Using the LNS DDE Server