Echelon LNS DDE Server - Manual (Page 111)

DetailInfo.ModelNumber R The type of protocol processor in the device. If the protocol processor is a
Neuron Chip, this will be one of the following values:
0 Model 3150
8 Model 3120
9 Model 3120E1
10 Model 3120E2
11 Model 3120E3
12 Model 3120A20
13 Model 3120E5
A value of 128 or greater indicates a non-Neuron Chip protocol processor,
such as a microcontroller running the Adept implementation of the
LONWORKS protocol.
DetailInfo.Reset Cause R The cause for the last reset on the device.
0 No reset has occurred since the last time this status was cleared
1 The last reset occurred as a result of a powerup.
2 The last reset was caused by activation of the reset pin.
12 The last reset was caused by a watchdog timer timeout.
20 The last reset was caused by software.
DetailInfo.TransactionTimeout R The number of times an acknowledged or request/response message
failed after all the retries. This number stops increasing when it reaches
65,535, and is set to zero when the device power cycles or when a Clear
status command is issued to the device.
DetailInfo.VersionNumber R The version number of the protocol processor (typically the version of the
Neuron Chip firmware) contained in a device.
DetailInfo.XmitErrors R The number of times the device received a packet with an invalid CRC,
received a packet that was too short, received a packet too long for the
device's input buffer, or saw a timeout. This number stops increasing when
it reaches 65,535, and is set to zero when the device power cycles or
when a Clear status command is issued to the device.
DetailInfo.ReceiveTxFull R The number of times the device or router received a packet for which there
was no more room in the device's transaction database.
L ON M ARK
Object Properties
The L
ON
M
ARK
Object’s properties provide access to individual L
ON
M
ARK
objects on L ON M ARK -compliant devices. L ON M ARK objects are not available
on all devices, and some of the properties are optional for devices that have
L ON M ARK objects. The device must have a L ON M ARK -certified (type 8) or
L
ON
M
ARK
-compliant (type 9) program ID to use these properties.
Description R/W Descriptive information about the LONMARK object.
FuncProfileDescription R Desciptive comment of the functional profile for the LONMARK object.
Name R/W The name of the LONMARK object.
Request.Normal R/W Set to 1 to cause the object to be Enabled, and not in Override. Setting to
0 has no effect.
Request.Disable R/W Set to 1 to Disable an object. Set to 0 to Enable it.
Request.SelfTest R/W Set to 1 to execute an object self-test.
Request.Override R/W Set to 1 to place object in Override. Set to 0 to remove the Override
condition.
LNS DDE Server User's Guide 8-7