Echelon Mini FX - Manual (Page 72)

Mini FX User's Guide 59
through the ISI protocol (all self-installed devices in the network are silently
registered and added to the Device list).
4. From the list in the Application Image box, select the application image file to be
downloaded into the device you selected in step 3. The list includes all the
application images you have recently built or added with the Mini FX Application.
The last application image file that was built with the Mini FX Application appears
in this box by default.
To select an application image file that is not listed, click Add, and then browse to
and select the application image file (.NDL extension) to be downloaded. You can
select an application image file that you built using the Application tab, or you can
select any other existing application image file. The Mini FX Application builds
multiple types of application image files to support various network tools; however,
you must select an .NDL file when loading a device with the Mini FX Application.
Note: You cannot load the MgDemo Mini FX/PL example application on a PL 3170
EVB.
5. Click Load to load the selected Neuron application image into the selected device.
The Status box at the bottom of the Device tab informs you when the application
image has been successfully loaded into the device, and it also informs you of any
load errors. For more information on Neuron linker (NLD) errors, including tips on
how to resolve them, see Chapter 7 of the Neuron Tools Errors Guide.