Echelon Mini FX - Manual (Page 128)

Mini FX User's Guide 115
Figure B-3 Default Memory Properties for FT 5000 Evaluation Board Hardware
Template
The Memory Addresses box details how on chip and off-chip memory is organized on
the selected Neuron Chip or Smart Transceiver model. These values are dependent on
the chip type and may be modified depending on the Neuron model and available
memory. You can modify the Start and End locations for available memory by clicking
the arrows. A value of 0x0000 is displayed for any memory location that has not been
set; N/A is displayed for any memory location that is not available.
The Non-Volatile Memory box specifies the type of external non-volatile memory
(EEPROM, FLASH, and NVRAM) used, if any. If EEPROM is selected, the Write Time
field specifies the EEPROM write time. If Flash is selected, the Sector Size field
specifies the flash memory sector size.
The following sections describe the memory properties of the Series 5000 chips, 3150
Neuron core, and 3120 and 3170 Neuron core.
Series 5000 Chips
The address ranges and consumption for the on-chip and off-chip memory of the Series
5000 chips are as follows:
Off-Chip ROM The Series 5000 chips do not support off-chip memory;
therefore, this property is set to N/A.