Echelon i.LON 600 LonWorks/IP Server - Manual (Page 35)

Section 1: Setting Up and Using the i.LON 600 Internet Server
Restoring Factory Defaults
When in secure access mode (see the Security Access Reset section later in this chapter),
the Security Web page will display a link to the Restore Factory Defaults Web page.
Click the Restore Factory Defaults button on this page to reset the configuration of the
i.LON 600 to its factory default. This will restore the following i.LON 600 configuration:
Table 7. i.LON 600 Factory Default Settings
FTP user name:
ilon
FTP password:
ilon
Automatically obtain IP address:
false
IP address:
192.168.1.222
Subnet mask:
255.255.255.0
Gateway:
192.168.1.222
Web server port::
80
FTP server port:
21
Hostname:
ilon600
SNTP servers:
0.0.0.0
Time zone:
(GMT-08:00) Pacific Time (US &
Canada); Tijuana
L ON W ORKS /IP port:
1628
LonTalk addresses:
unconfigured
This will restore the IP address back to 192.168.1.222, so you may need to place
your computer on that subnet or use the route command to communicate with the i.LON
600 after the reboot is complete.
i.LON 600 User’s Guide 27