Echelon i.LON 600 LonWorks/IP Server - Manual (Page 19)

Section 1: Setting Up and Using the i.LON 600 Internet Server
Connecting High Voltage Models 72601 & 72602
!
SAFETY WARNING
When connecting the power terminals of an i.LON 600, always connect earth ground
first, then Neutral, then Line. This minimizes the risk of shock or damage should power
inadvertently be present on Line.
!
SAFETY WARNING
The i.LON 600 uses a Poly-carbonmonoflouride Lithium Coin battery. RISK OF
EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF UNUSED BATTERIES ACCORDING TO THE INSTRUCTIONS.
!
SAFETY WARNING
The i.LON 600 is not equipped with a power disconnect device. When the device is
installed and mounted, the installer must provide a means to safely remove power, such
as a power switch or a circuit breaker.
!
SAFETY WARNING
The terminal block has a plastic cover protecting the screw terminals used to connect the
power inputs. This cover MUST be placed on the i.LON 600 after the power wires are
connected and before the power is activated.
The 100-240VAC power mains connection is used to power the
i.LON 600. The i.LON 600 contains an auto-ranging, auto-setting mains power supply.
i.LON 600 User’s Guide 11