ADLINK aTCA-N700 - Manual (Page 59)

aTCA-N700 HW Users Guide
５９
0 : Off
1 : On
EMC_DB_1_GEB2_IO59PD
B5V0
K3 1V5_AVS_EN O
1.5V,BCM AVS Enable
0 : Off
1 : On
EMC_DB_0_GEA2_IO59ND
B5V0
K2 1V2_EN O
1.2V Enable
0 : On
1 : Off
GBB1_IO18PDB1V0 B20 IPMC_PWR_OK O
Power OK
0 : Off
1 : On
Reserved GPIO (To CPLD)
EMC_AB_9_IO08PDB0V0
D13 Connected to CPLD I/O FPGA_GPIO0
EMC_AB_7_IO07PDB0V0 A12 Connected to CPLD I/O FPGA_GPIO1
EMC_AB_2_IO05NDB0V0 B10 Connected to CPLD I/O FPGA_GPIO2
EMC_OEN1_N_IO03PDB0V
0
C10 Connected to CPLD I/O FPGA_GPIO3
GFA0_IO64NDB5V0 J6 Connected to CPLD I/O FGPA_GPIO4
GCC2_IO25PDB1V0 H18 Connected to CPLD O
RTM Buffer Enable
0 : Enable
1 : Disable
EMC_AB_12_IO10NDB0V0 A14 PLD_TSALL O
CPLD I/O Floating
0 : Normal
1 : Float
ADC_DAC
TM0 W8
CN6880_A O Thermal monitor
GNDTM0 Y8 CN6880_A O Thermal monitor
ADC0 Y9 VDD_2V5 I Monitoring Power
ADC1 AA8 VDD_3V3 I Monitoring Power
ADC2 V9 12V I Monitoring Power
ADC3 AB8 NP_1V1_A I Monitoring Power
TM2
AB1
2
CN6880_B O Thermal monitor
GNDTM1
AA1
2
CN6880_B O Thermal monitor
ADC4 U12 NP_1V1_B I Monitoring Power
ADC5 V12 MSW_1V0 I Monitoring Power
ADC6 V11 MSW_AVS I Monitoring Power
ADC7 T12 1V5_A I Monitoring Power
ADC8 V14 1V5_B I Monitoring Power
TM4 T13 P2041 O Thermal monitor
GNDTM2 U13 P2041 O Thermal monitor
9.3. Ethernet Transceiver BCM5221
The BCM5221 is a 10/100 BASE-T Ethernet transceiver that supports MII to MDI
interface conversion. The RMII side is connected to the IPMC and the MDI side is
connected to the base switch. This port is used for Serial-over-LAN (SOL). The IPMC
configures the device through the MDIO interface.
9.4. CPLD
The CPLD LCMXO640C-3FTN256C from Lattices plays important roles in collecting
and distributing many hardware signals among the IPMC, the CPU P2041 and many
other devices. The LMP configures the CPLD registers for the management. Refer to
the CPLD datasheet for details.