Headers and jumpers, Figure 4-3 cpld jtag header, Figure 4-4 cop header – ADLINK aTCA-N700 User Manual

Page 18: Figure 4-5 standalone mode selector header

Text mode
Original mode

aTCA-N700 HW Users Guide

１８

4.1.1. Headers and Jumpers

1) CPLD JTAG Header (J14): This header is used to reprogram the CPLD bit file using
a JTAG cable.

Figure 4-3 CPLD JTAG Header

2) COP-Header (J5): This header is used to access the LMP for a necessary
debugging situation to connect to the debug monitor.

Figure 4-4 COP Header

3) Standalone mode selector Header (J25): The header is used when a shelf manager
is not available. Put a cap on the header to connect pin 1 and pin 2 for stand-alone
mode.

Figure 4-5 Standalone Mode Selector Header