ADLINK aTCA-N700 - Manual (Page 14)

aTCA-N700 HW Users Guide
１４
3.1.6. LEDs and Markers
Various LEDs for system status monitoring are available from the faceplate. Shown in
Table 3-4
are the LEDs and their descriptions.
Table 3-4 Front Panel LEDs and Markers
Name Marker Display Description
Blue Solid DC-DC Power OFF(M1)
Blue Short Blink
Hot swap
Operation(M5/M6)
Blue Long Blink Hot swap Operation(M2)
HS LED
OFF Normal Operation(M3/M4)
Red Solid Out of Service(M1)
Red Blink
Out of Service or Service
Preparation (M5/M6)
OOS LED
OFF
Normal Operation
(M3/M4)
Green Solid Power GOOD
Power GOOD
LED
OFF Power Fail
Amber Solid Health Check
Health LED APP
OFF Normal Operation
Amber Solid Fabric Link ON
Amber Blink Fabric Link ON & Activity
Fabric I/F LED
[2:1]
OFF Fabric Link OFF
Amber Solid Base Link ON
Amber Blink Base Link ON & Activity
Base I/F LED
[2:1]
OFF Base Link OFF
Green Solid MGMT Link ON
Green Blink MGMT Link ON & Activity
MGMT
Link/ACT LED
OFF MGMT Link OFF
Yellow Solid 1G speed Indicator
MGMT Speed
LED
OFF
10/100Mbps Speed
Indicator
Green Solid 1G or 10G Link ON
E
OFF Link OFF
Green Blink 1G or 10G Activity
Service Port
L/A
OFF No Activity
Console Port N/A Section 3.1.1
USB Port N/A Section 3.1.2
MGMT Port N/A Section 3.1.3
Reset N/A Section 3.1.5