ADLINK aTCA-N700 - Manual (Page 10)

aTCA-N700 HW Users Guide
１０
2. Summary of Specifications
Summarized in Table 2-1 are the specifications of the aTCA-N700 platform.
Table 2-1 aTCA-N700 Specifications
Feature Function Description
Dimensions 8U x 6HP x 280mm AdvancedTCA,
single slot Physical
Compliance PICMG3.0 Rev 3.0 and PICMG3.1,
Option 3, 9, Rev 2.0 and 40GBase-
KR4
Network Processor Dual Cavium OCTEON II CN6880
DRAM Memory/NP 4x DDR3-1066 DIMM, 32GB max
Boot Flash Memory/NP 2x 8 MB (NOR Flash, redundant)
OS Flash Memory/ NP 2x 2 GB (NAND Flash, redundant)
Processor
Subsystem
Optional TCAM Mezzanine board with Interlaken-LA
Processor QorIQ [email protected], Quad core
DRAM Memory 1x mini VLP UDIMM,
ECC DDR3 @666MHz, 2GB
Boot Flash Memory 2x 8 Mbit (SPI EEPROM, redundant)
LMP Subsystem
OS Flash Memory 2x 8 GB (chip SSD, redundant)
Data
Interconnection
Subsystem Ethernet Switching BCM56842, Non-blocking L2/L3
switch fabric with QoS Support.
10G Interface 4x SFP+ (10G/1G)
10/100/1000BASE-T,
Management One RJ-45 for LMP
One RJ-45 to Base Switch (for NPUs)
I/O Interface
Serial (UART), Console 3x RJ-45 serial ports
- One for LMP or IPMC
- Two for NPs
Shelf
Management Blade Operation and
Management IPMI v2.0
Base Interface Zone 2, 1000BASE-T Ethernet, dual
star Backplane
Connection
Fabric Interface Zone 2, PICMG 3.1 Option 3, Option
9, KR and 40G Ethernet in 40GBase-
KR4, dual star
Power Power distribution Front Blade: 320 watts max. w/o
TCAM
RTM: 25 watts max.
Temperature Operating: +0°C to 50°C
Non-operating: -40°
to +70°C
Relative Humidity Operating: 0 – 95% @40°C
Non-operating: 5-95%
Shock Operating: TBD
Non-operating: TBD
Vibration (5-500Hz) Operating: TBD
Non-operating: TBD
Environment
Altitude TBD
Bootloader
U-boot (LMP, NPs)
BSP ADLINK BSP (LMP, NPs)
Operating System Open Linux (LMP, NPUs)
Software
Development
Environment Cavium/Broadcom SDK