TeeJet RX 400p - Manual (Page 80)

RX 400p
98-05044 4-38
R1
GPRRE@ Off
This menu item allows you to toggle the output of
the GPRRE message through the MAIN port of the
RX 400p receiver. To change the current update
rate, press the
button followed by adjusting the
rate using the or key, then press . This
message may be set for output at 1 Hz only.
GPVTG@ 5 Hz
This menu item allows you to toggle the output of
the GPVTG message through the MAIN port of the
RX 400p receiver. To change the current update
rate, press the
button followed by adjusting the
rate using the or key, then press . This
message may be set for output at 5 Hz, 1 Hz, 5 s
updates or may be turned off.
GPZDA@ Off
This menu item allows you to toggle the output of
the ZDA message through the MAIN port of the RX
400p receiver. To change the current update rate,
press the
button followed by adjusting the rate
using the or key, then press . This
message may be set for output at 5 Hz, 1 Hz, 5 s
updates or may be turned off.
Bin95@ Off
This menu item allows you to toggle the output of
the Binary 95 message (contains GPS ephemeris
data) through the MAIN port of the RX 400p
receiver. To change the current update rate, press
the
button followed by adjusting the rate using
the or key, then press . This message
may be set for output at 5 Hz, 1 Hz, 5 s updates or
may be turned off.