TeeJet RX 400p User Manual

Page 121

RX 400p

5-5 98-05044

If you wish to save the configuration, simply move the memory location to which
you would like to save it, into focus and press the

button. You will then be

prompted to enter in each alpha-numeric character of the new configuration’s name.
The name may be up to 14-characters long. Simply adjust the current character using
the

button, followed by pressing the

button. The character choices are

alphanumeric, including only capitalized letters. You do not need to enter all 14
characters.

To erase a character, use the

button to locate the , character and press the

button. To complete the new name of the configuration, adjust the current

character to > and press the button. Pressing the

button on the last of a full

14-character name will complete the naming process.

Once the name of the new configuration has been entered to your satisfaction and
you have completed the name by entering the character, the Wizard will finish and
the menu system will return to the main menu. You may, at any time, select your
new configuration by beginning the Configuration Wizard again. The first step
allows you to select a previously saved configuration. If you wish to choose a saved
configuration, simply choose ‘Yes’, otherwise the step-by-step Wizard process will
begin.