TeeJet RX 400p - Manual (Page 102)

RX 400p
98-05044 4-60
R1
When using an external source, be sure that it is
providing RTCM SC-104 compliant data and not a
proprietary binary format.
Tune@Auto Auto When accessed using the button, this menu item
allows you to manually tune the beacon receiver
using the
or key. When manually selecting a
tuning frequency, you will need to specify the MSK
modulation rate. You may choose 100 bps, 200 bps,
or automatic MSK rate detection.
Auto?Tune@ When this menu item is selected using the button,
it will instruct the internal beacon receiver to enter
automatic tracking mode and perform a new Global
Search, erasing any previous search information.
TuneBeaconName@ When accessed using the button, this menu item
allows you to choose a beacon, by name, from an
internal listing of beacons. The beacon that you
select is chosen initially from a listing of continents,
then by country, and finally from a listing of beacons
for that chose country. This is discussed further in
Section 4.12.2.1
Table Version@ When accessed using the button, this menu will
identify the version of the current beacon table in
memory.
Back@ When accessed using the button, this menu item
returns the menu system to the previous menu.