TeeJet RX 400p - Manual (Page 16)

RX 400p
98-05044 xiv
R1
Organization
This manual contains the following chapters:
Chapter 1: Installation - describes how to install the RX 400p receiver and antenna,
and provides a foundation for interfacing the RX 400p with an external data logging
or monitoring device.
Chapter 2: RX 400p Overview - provides details on the fundamental operating
modes of the internal sensors of the RX 400p.
Chapter 3: RX 400p Architecture - provides a description of the integration of the
RX 400p.
Chapter 4: Operation - describes how to configure and operate the RX 400p
receiver using the keypad-driven menu system. This Chapter also provides a detailed
listing of the default parameters.
Chapter 5: Configuration Wizard - introduces the Configuration Wizard feature
and describes how it may be used to simplify configuration of the RX 400p receiver.
Chapter 6: NMEA 0183 Messages - describes the subset of NMEA 0183
commands and queries used to communicate with the GPS features of the two
internal RX 400p sensors.
Chapter 7: Troubleshooting - provides you with diagnostic information to aid in
determining a source of difficulty for a particular installation.
Appendix A: Specifications - details the technical characteristics of the RX 400p
receiver and CDA-2B antenna.
Appendix B: RX 400p Interface - provides instructions to interface the RX 400p
with external devices.