Compaq 3200 - Manual (Page 87)

6-5
Compaq Smart Array 3200 Controller Reference Guide
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: G-CH06.DOC Last Saved On: 12/7/98 9:23 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
NetWare 3.12, 4.2, and 5.0 Driver
Installation from Novell SSD
Compaq provides an installation script on the Novell SSD that integrates
Novell’s INSTALL.NLM Product Options menu option. Use this option to install
or automatically upgrade Compaq storage adapter and device drivers. The
drivers are copied from the Novell SSD to both the DOS server startup directory
(typically C:\NWSERVER) and to the SYS:SYSTEM directory.
To install the driver for the Smart Array 3200 Controller:
1. Load INSTALL.NLM from the server console prompt.
2. Select Product Options from the Main menu.
3. Choose Install a Product Not Listed from the Other Installation Actions
menu.
4. If you are installing from Novell SSD diskettes, make sure that Disk #1,
INSTALL, DOS CD SUPPORT & ADVANCED SERVER SUPPORT,
is in the appropriate drive. Press Enter to confirm the location of the
product (INSTALL.NLM defaults to A:\).
or
Select (or deselect) the options/products to be installed. For Compaq
NWPA driver support, select the option for Compaq NWPA Storage
Support. Compaq recommends that you also select the Compaq Online
Configuration Utility.
NOTE: Refer to Section 1.0 of STORAGE.RDM on Novell SSD Disk 4 for a
discussion of legacy DDFS versus NWPA device drivers.
5. Press F10 to accept the selected options and continue the installation or
upgrade.
6. Follow the instructions on the screen to complete the installation. You
will be warned that the latest intraNetWare Support Pack should be
installed. If you have already performed that installation, choose to
continue. Otherwise, Compaq recommends that you abort this
installation and install the intraNetWare Support Pack first.