Compaq 3200 - Manual (Page 118)

6-36 Installing the Operating System Drivers
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: G-CH06.DOC Last Saved On: 12/7/98 9:23 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Booting OS/2 from a
Smart Array 3200 Controller
This section includes information on booting a system from a Smart Array 3200
Controller.
The CPQARRAY.ADD driver must be present when booting from a Smart
Array 3200 Controller (the Compaq IAES is not a bootable device).
If a Smart Array 3200 Controller is the primary disk controller, edit the
CONFIG.SYS file and make sure the BASEDEV=CPQARRAY.ADD entry in the
file is the first BASEDEV entry. This ensures that the CPQARRAY.ADD driver
is the first ADD driver loaded causes OS/2 to assign the first hard drive on the
first Smart Array 3200 Controller as the boot drive. For example:
BASEDEV=CPQARRAY.ADD
BASEDEV=CPQ53CX.ADD
For OS/2 to boot from another controller, order the other controller first:
BASEDEV=AMSI02.ADD
BASEDEV=CPQARRAY.ADD