Compaq 3200 - Manual (Page 53)

5-9
Compaq Smart Array 3200 Controller Reference Guide
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: F-CH05.DOC Last Saved On: 12/7/98 1:22 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
4. Click the Done button to return to the Main Configuration screen. The
Logical Configuration View area should look similar to Figure 5-6.
Figure 5-6. Example Array - Logical Configuration View with one Array
5. Select the controller, then click the Create Array button to create
Array B.
6. Assign both 9.1-GB drives to the array. Click the Done button.
NOTE: In this example, each array was created using drives from the same
SCSI port. You can achieve better performance by selecting drives from both
ports for an array, assuming you installed the correct drives in both ports
before you ran the Array Configuration Utility.