Compaq 3200 - Manual (Page 111)

6-29
Compaq Smart Array 3200 Controller Reference Guide
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: G-CH06.DOC Last Saved On: 12/7/98 9:23 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Materials Needed
To create a set of Compaq EFS for SCO UnixWare diskettes, you will need:
■ Compaq SmartStart and Support Software CD (supplied in the Smart Array
3200 Controller option kit)
■ Blank diskettes
■ Access to a server or workstation with a bootable CD-ROM drive. This
may be the system in which you are installing the Smart Array 3200
Controller.
Creating the EFS Diskettes
To create the Compaq EFS for SCO UnixWare diskettes:
1. Boot the server from the Compaq SmartStart and Support Software CD.
2. From the Compaq System Utilities screen, select Create Support Software.
3. From the Diskette Builder screen, select Create Support Software
Diskettes from CD only.
4. Scroll down the list and select SCO UnixWare 2.x and 7.x.
5. Follow the instructions on the screen to create and label diskettes.
Accessing the Information
To access the driver installation information:
1. Place the diskette labeled Documentation Diskette in the diskette drive of
a server or PC.
2. Reboot the system.
3. Select the file named README.HBA to view or print the file.
4. Follow the instructions in this file to install the Smart Array 3200
Controller driver in an existing UnixWare server.