Compaq 3200 - Manual (Page 189)

I-3
Compaq Smart Array 3200 Controller Reference Guide
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: P-APPI.DOC Last Saved On: 12/7/98 9:35 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
POST Error Messages continued
Code Meaning Recommended Action
1724 Slot x Drive Array - Physical Drive Position
Change(S) Detected - Logical drive
configuration has automatically been
updated.
This message indicates that logical drive
configuration has been updated automatically
following physical drive position changes. Press
F1 to resume.
1726 Slot x Drive Array - Array Accelerator Memory
Size Change Detected.
This message indicates that the array
accelerator configuration has been updated
automatically due to replacement of the Array
Accelerator (or controller) with one of them
having a different memory size. Press F1 to
resume.
1727 Slot x Drive Array - New Logical Drive(s)
Attachment Detected. If more than 32 logical
drives, this message will be followed by:
Auto-configuration failed: Too many logical
drives.
This message indicates that the controller has
detected an additional array of drives that was
attached when the power was off. The logical
drive configuration information has been
updated to add the new logical drives. The
maximum number of logical drives supported is
32-additional logical drives will not be added to
the configuration. Press F1 to resume.
continued