Compaq 3200 - Manual (Page 121)

6-39
Compaq Smart Array 3200 Controller Reference Guide
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: G-CH06.DOC Last Saved On: 12/7/98 9:23 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Ignore the specified adapter; do not control the adapter with this driver.
This parameter prevents the ADD driver from recognizing the specified
adapter. Use this parameter to enable another driver to control a specific
adapter.
IMPORTANT: Do not ignore the primary controller or boot controller. The
system will not boot.
IMPORTANT: The driver must be loaded by a BASEDEV= statement in the
CONFIG.SYS file. This statement is inserted automatically by the
ADDARRAY.CMD installation procedure.
Example: You are running intraNetWare on your OS/2 2.x system and
you want an intraNetWare NLM to control Adapter 2 instead of the
ADD driver. The following statement would prevent the ADD driver
from claiming Adapter 2.
BASEDEV=CPQARRAY.ADD /A:2 /I