Compaq 3200 - Manual (Page 73)

5-29
Compaq Smart Array 3200 Controller Reference Guide
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: F-CH05.DOC Last Saved On: 12/7/98 1:22 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Online RAID Level and Stripe-Size
Migration
To change the RAID level and stripe size without loss of data or system
disruption, as to the Online RAID Level and Stripe-Size Migration screen. From
this screen you can reconfigure a currently configured logical drive to a new
fault-tolerance (RAID) level or a new stripe size.
Error and Warning Messages
When you start the Array Configuration Utility, the software checks each
controller to detect errors in its configuration. If a problem is found, the Array
Configuration Utility displays an error or warning message that describes the
problem. Error and warning messages include instructions to correct
configurations. If a warning message indicates “Internal Error Has Occurred”
and cites an error code number, the problem requires assistance from Compaq
Technical Support. See the “About This Guide” section at the beginning of this
book for technical support phone numbers.