Compaq 3200 - Manual (Page 11)

xii About This Guide
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: A-FRNT.DOC Last Saved On: 12/7/98 1:56 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Symbols in Text
These symbols are in the text of this guide. They have the following meanings
WARNING: Indicates that failure to follow directions in the
warning could result in bodily harm or loss of life
CAUTION: Indicates that failure to follow directions could result
in damage to equipment or loss of information
IMPORTANT: Presents clarifying information or specific instructions
NOTE: Presents commentary, sidelights, or interesting points of information
Symbols on Equipment
These icons may be located on equipment in areas where hazardous conditions
may exist.
Any surface or area of the equipment marked with these
symbols indicates the presence of electrical shock hazards.
Enclosed area contains no operator serviceable parts.
WARNING: To reduce the risk of personal injury from
electrical shock hazards, do not open this enclosure.
Any RJ-45 receptacle marked with these symbols indicates a
Network Interface Connection.
WARNING: To reduce the risk of electrical shock, fire, or
damage to the equipment, do not plug telephone or
telecommunications connectors into this receptacle.
Any surface or area of the equipment marked with these
symbols indicates the presence of a hot surface or hot
component. If this surface is contacted, the potential for
personal injury exists.
WARNING: To reduce the risk of personal injury from a hot
component, allow the surface to cool before touching.