Compaq 3200 - Manual (Page 40)

4-2 Running the System Configuration Utility
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: E-CH04.DOC Last Saved On: 11/30/98 5:33 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
If your server does not have a bootable CD-ROM drive, you can create diskettes
of the latest version of the System Configuration Utility from the Compaq
SmartStart and Support Software CD. See the following section, “System
Configuration Diskettes,” for instructions on creating the diskettes.
If your server has a bootable CD-ROM drive, proceed to “Running the System
Configuration Utility.”
System Configuration Diskettes
Materials Needed
To create Compaq System Configuration Utility diskettes, you will need:
■ Compaq SmartStart and Support Software CD (supplied in the Smart Array
3200 Controller option kit)
■ At least four blank diskettes
■ Access to a server or workstation with a bootable CD-ROM drive. This
may be the system in which you are installing Smart Array 3200
Controller.
Creating Diskettes
To create System Configuration Utility diskettes:
1. Boot the computer from the Compaq SmartStart and Support Software CD.
2. From the Main Menu screen, select Create Support Software.
3. Scroll down the list and select Compaq System Configuration Utility.
4. Follow the instructions on the screen to create the utility diskette(s).