beautypg.com

Sco unixware 2.x and 7.x, Updating the compaq insight manager agents, Getting the driver and installation information – Compaq 3200 User Manual

Page 110

background image

6-28

Installing the Operating System Drivers

Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002

File Name: G-CH06.DOC Last Saved On: 12/7/98 9:23 AM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

Updating the Compaq Insight
Manager Agents

If you are using Compaq Insight Manager, you will need to update the Insight
Agents to support the new Smart Array 3200 Controller.

If you used SmartStart 4.22 or later to install the operating system on a new
Smart Array 3200 Controller installation or to upgrade your driver in an existing
installation, the agents were updated by SmartStart; you will not have to
manually update the agents.

If you did not use SmartStart 4.22 or later as part of your Smart Array 3200
Controller installation, you must manually update the Insight Agents. The
correct agents can be obtained from your local Compaq Reseller or authorized
Compaq Service Provider. Refer to the documentation included with Compaq
Insight Manager for the correct procedure for updating agents.

Installation of the Smart Array 3200 Controller is now complete. Reboot the
server to begin using the array controller.

SCO UnixWare 2.x and 7.x

The instructions in this section describe where you can find the latest driver and
support information necessary to install the initial driver for a new Smart Array
3200 Controller or to upgrade the driver in an existing UnixWare server/Smart
Array 3200 Controller system. If you use SmartStart to install UnixWare and
drivers on a new server or to upgrade an existing server, you can skip this
section and you do not need to create the EFS diskettes.

Getting the Driver and
Installation Information

The latest drivers and support files for SCO UnixWare and information about
installing the driver are located on the Compaq SmartStart and Support
Software CD (supplied with the Smart Array 3200 Controller option kit). To
access these files, create a set of Compaq EFS for SCO UnixWare diskettes
from the Compaq SmartStart and Support Software CD.