Aces proxy, Red dsmc operation guide – RED DSMC User Manual

Page 77

RED DSMC OPERATION GUIDE

955-0020_V5.3, REV-J | 77

6. Select the curve that you want to apply to the output for the selected monitor from the Curve drop-down

menu:

‒ Neutral: The Neutral Gamma Space displayed on the Color/Gamma menu is applied to the output.

‒ Graded: The Graded Gamma Space selected on the Color/Gamma menu is applied to the output.

7. Repeat

Step 5

and

Step 6

for each monitor you are using.

8. To return to the Color/Gamma menu, select Close. To close all menus, tap any area outside of the menu.

ACES PROXY

Select the ACES Proxy check box to generate an ACES-compliant solution. When this option is enabled, all

monitors output an ACES proxy that corresponds to ACESproxy10 (10-bit encoding). The firmware adjusts the

proxy output for each camera and sensor type to ensure that the raw image data is properly transformed into

the ACES color space.
You can record via HD-SDI or HDMI, apply a LUT through a LUT box, and then view the footage in real-time

on an external third-party monitor. Use a LUT that incorporates the Reference Rendering Transform (RRT) and

Output Device Transform (ODT) to create the look you want to achieve for your display.
Enabling the ACES Proxy option does not change the footage recorded to the SSD, but does add an ACES

metadata tag to the R3D file. The R3D has the most recently-selected color space and graded gamma space

(you cannot select color space and graded gamma space when ACES Proxy is enabled).