RED DSMC - Manual (Page 29)

RED DSMC OPERATION GUIDE
COPYRIGHT © 2015 RED.COM, INC 955-0020_V5.3, REV-J | 29
REDLINK BRIDGE
The REDLINK Bridge is a wireless module that provides communication support for third-party app
development. The REDLINK Bridge attaches to the rear of the BRAIN or other compatible DSMC rear module.
The REDLINK Bridge is part of the REDLINK Development Kit and uses the REDLINK Command Protocol (RCP)
to communicate information between the DSMC and your application.
For more information, see the
REDLINK Bridge Operation Guide , available at www.red.com/downloads .
NOTE: The REDLINK Bridge requires DSMC firmware v5.2.8 or later.
REDLINK Bridge