Gig-e (ethernet), Compatible cables, Red dsmc operation guide – RED DSMC User Manual
Page 192
COPYRIGHT © 2015 RED.COM, INC
RED DSMC OPERATION GUIDE
955-0020_V5.3, REV-J | 192
GIG-E (ETHERNET)
The GIG-E 9-pin 0B LEMO connector provides a 1000BASE-T (IEEE 802.3ab) gigabit Ethernet connection for
remote camera setup, master/slave camera communication, and external metadata ingest. Since the GIG-E
connector does not support slower speeds (10BASE-T and 100BASE-T), ensure that any device you connect
to supports 1000BASE-T.
9
2
3
4
5
6
7
8
1
9-PIN 0B LEMO GIG-E CONNECTOR
PIN
SIGNAL
DESCRIPTION
DIRECTION
1
BI_DC +
Data pair C+
N/A
2
BI_DC -
Data pair C-
N/A
3
BI_DD+
Data pair D+
N/A
4
BI_DD -
Data pair D-
N/A
5
BI_DA-
Data pair A-
N/A
6
BI_DA+
Data pair A+
N/A
7
BI_DB+
Data pair B+
N/A
8
BI_DB-
Data pair B-
N/A
9
N/A
Do not connect
N/A
NOTE: Mating connector is FGG.0B.309.CLAD32Z.
COMPATIBLE CABLES
790-0159: LEMO-to-CAT5E Ethernet Cable (9')
790-0163: Master/Slave Gig-E Cable (4')
Front Face of the GIG-E Connector
(Looking at the Camera)