Nikon f-mount lenses, Attach nikon f-mount lenses, Detach nikon f-mount lenses – RED DSMC User Manual

Page 200: Red dsmc operation guide

RED DSMC OPERATION GUIDE

955-0020_V5.3, REV-J | 200

NIKON F-MOUNT LENSES

This section describes the appropriate method for attaching and detaching Nikon F-Mount lenses.
For more information, refer to the original manufacturer’s instructions.
WARNING: ALWAYS protect your equipment, when it is not in use, by replacing lens caps and mount caps.

ATTACH NIKON F-MOUNT LENSES

1. Rotate the secondary locking clamp counter-clockwise to disengage.
2. Press the lens release button and rotate the lens cap clockwise to remove the DSMC mount cap.
3. Remove the rear lens cap.
4. Align the mounting index (white dot) on the lens with the mounting index on the DSMC Nikon mount and

position the lens in the bayonet mount.

5. Rotate the lens counter-clockwise until it clicks into place, being careful to NOT press the lens release

button.

6. Rotate the secondary locking clamp clockwise to engage.

DETACH NIKON F-MOUNT LENSES

1. Rotate the secondary locking clamp counter-clockwise to disengage.
2. Press and hold the lens release button. While holding the lens release button, turn the lens clockwise until

it stops and remove it from the DSMC mount.

3. Replace the rear lens cap and DSMC mount cap when items are not in use.