Compatible cables, Ctrl (rs232 control), Red dsmc operation guide – RED DSMC User Manual
Page 191
RED DSMC OPERATION GUIDE
COPYRIGHT © 2015 RED.COM, INC
955-0020_V5.3, REV-J | 191
COMPATIBLE CABLES
790-0154: 3BNC-to-00 LEMO Sync Cable
790-0187: 4-Pin 00 LEMO-to-Flying Lead
790-0415: RED Start/Stop Cable (14-Pin LEMO to SYNC, CTRL, BNC)
790-0428: RED Start/Stop Cable (14-Pin to 00B SYNC)
CTRL (RS232 CONTROL)
The 4-pin 00B LEMO CTRL connector supports RS232 remote control for 3D camera communication and third-
party metadata ingest applications. For more information, go to
.
The General Purpose Out (GPO) tally presents 3.3 V at a maximum of 0.04 A between pins 1 and 3. When used
as a record tally, the rising edge of the pulse indicates start of record, falling edge represents end of record.
For more information about controlling the DSMC via RS232, download the
.
1
2
4
3
4-PIN 00B LEMO CTRL CONNECTOR
PIN
SIGNAL
DESCRIPTION
DIRECTION
1
GROUND
Common ground
N/A
2
232 RX
RS232 RX
In
3
SS/GPO
Shutter sync/general purpose output
Out
4
232 TX
RS232 TX
Out
NOTE: Mating connector is FGG.00.304.CLAD27Z.
COMPATIBLE CABLES
790-0154: 3BNC-to-00 LEMO Sync Cable
790-0187: 4-Pin 00 LEMO-to-Flying Lead
790-0415: RED Start/Stop Cable (14-Pin LEMO to SYNC, CTRL, BNC)
Front Face of the CTRL (RS232)
Connector (Looking at the DSMC)