Red dsmc operation guide – RED DSMC User Manual

Page 110

RED DSMC OPERATION GUIDE

955-0020_V5.3, REV-J | 110

C. Manually set the next focal length.
D. Select Add Cal @ xx..., where “xx” is the current focal length.

NOTE: If you calibrate a focal length that has already been calibrated, the new files overrides the previ-

ous file.

The lens calibration process for the current focal length starts and a progress bar displays. Once the

calibration process starts, DO NOT touch the lens, since that may cause incorrect calibration.

7. Repeat

for each focal length of the lens.

The lens calibration file remains on the camera after system restores and firmware upgrades.