Set up internal timecode, Red dsmc operation guide – RED DSMC User Manual

Page 151

Text mode
Original mode

RED DSMC OPERATION GUIDE

955-0020_V5.3, REV-J | 151

SET UP INTERNAL TIMECODE

To set up and adjust timecode generated by the BRAIN, follow the instructions below.
1. Go to Menu > Settings > Project > Time Code.
2. Select the desired Time Code Display mode.
3. Set Time Code Source to User Provided.

4. Use the additional controls to sync TOD timecode with the RTC or set manually.

Alternatively, go to Menu > Media > Format Media... to set Edge timecode manually.
The TC indicator in the Lower Status Row remains gray when internal timecode is enabled.

Source: User Provided